USB-C to Mini USB Data Cable (1m)

🔥 [No Extra Hub Required! The Ultimate Direct-Connect Cable Built for Robotics Competitors and Developers]

Have you ever experienced this frustrating situation? Every time you buy a new motor controller, sensor, or development board, the included cable is always an ancient USB-A. Yet, modern laptops (especially MacBooks) have long fully transitioned to Type-C ports. To connect to your robot, your desk is always cluttered with a bulky Hub adapter...

"One more adapter means one more risk of signal degradation and poor contact."

In a race against time at a competition, you simply cannot afford a "Serial Port disconnection" caused by a loose Hub!

This dedicated Type-C to Mini USB data cable is born to eliminate the need for adapters and free up your laptop ports. It allows your Mac or modern laptop to connect directly to your robot with just one cable. The distance between your computer and the chip no longer requires compromise.

💻 Say Goodbye to Hubs, Eliminate Communication Dead Zones

Plug the Type-C connector directly into your laptop, delivering a native USB 2.0 signal straight to your development board, significantly increasing the COM Port recognition success rate. Whether you're firing up VEXcode, Arduino IDE, or ROS, uploading code is no longer a game of roulette. Ensure every single upload goes through successfully on the first try.

📡 Sticking to USB 2.0 for Pure Stability

Development boards and microcontrollers simply don't need the USB 3.0/4.0 speeds meant for high-res video. We optimized specifically for your needs by using a USB 2.0 signal architecture to avoid high-frequency interference, ensuring data transmission is absolutely stable, with no packet loss, and no disconnections.

🛡️ Tough Braiding & Integrated Protection, Built for Hardcore Environments

The cable body is fully upgraded to a high-density, wear-resistant braided cable that is pull-resistant and tangle-free. Toss it into your toolbox without worrying about scratches from screwdrivers or pliers.

The interior uses a high-quality tinned copper core, significantly reducing impedance to ensure zero attenuation in signal and power transmission while supporting up to 2.4A output. Most importantly, the connector and the strain relief (SR) feature an integrated wrap-around reinforcement design, offering ultimate bending resistance and preventing breakage. It perfectly handles the high-intensity pulling during PID control calibration and dynamic competition testing!

📝 Product Specifications

• Interface Type: Type-C to Mini USB (Dual Straight Connectors)

• Design Type: Single Cable (1-to-1 connection)

• Cable Material: Premium High-Density Wear-Resistant Braided Nylon

• Cable Length: 1 Meter (1m)

• Maximum Output Current: 2.4A

• Key Features: Seamless Hub-Free Direct Connection, High-Stability Data Transfer, Reliable Power Delivery